by silvi | 13:04

Your Deck Stain Questions Answered Refinishing your cedar deck can initially seem to be a daunting task. But it is essential in avoiding the fading and decaying of your wood decking stuff due to harsh weather conditions. With the appropriate knowledge and helpful hints, it is possible to master the chore of re-staining your deck. Here are the responses to commonly asked questions. How soon should I stain a brand new cedar deck. Let your deck dry for a few days in warm, sunny weather, to reduce its moisture content which will improve stain penetration. You might need to wait until springtime to stain it if your deck was built in winter.
Practical and Helpful Tips: Options
What timing is perfect.
How I Became An Expert on Services
To get the most life from your cedar deck, you should refinish and clean it every 2-3 years. For staining your deck you require some mild, dry weather. You can wait for about three days after the last rain to allow it to dry and also ensure there is plenty of sunshine following stain application. Avoid staining when the sun is scorching, which can also prevent the stain penetration. For the best results, apply the stain when it is cooler outside, preferably in the morning. What should I do first when staining my deck. First, make sure the deck is in the right condition to be stained. That is, how good is the wood quality? If the wood is in need of some re-conditioning, you may need to sand for a smooth finish. After that, give your deck a proper cleaning to remove as much dirt and preceding coatings as possible. Ensure that you use the proper quantity of water-pressure if you choose a pressure washer to avoid ruining the wood. Let it dry after cleaning. What products to use for cleaning. Use of oxygen bleach is recommended to retain the original state of the wood and for increased permeability into the wood. Oxygen bleach is different from the usual bleach which is incredibly harmful to the brush and can destroy the wood’s condition. Oxygen bleach is a powder that discharges oxygen ions into water that is warm, making a deep cleanse solution best for dry timber. What kind of stain should I use. Deck stains come in three types: clear, semi-transparent, and solid or opaque. Transparent deck stains are clear and ultimately maintain the normal color of the wood while shielding it from harmful elements. Because of the lack of pigmentation, annual reapplication is deemed necessary to avoid fading. Semi-transparent deck stains give better protection than clear ones while still letting some of the natural wood color to be seen. Semi-clear stains come with UV-blocking protective tint allowing for reduced frequency of applications. Its reapplication can be done once every two years. Solid stains are entirely pigmented to cover up the woods color. These offer protection from the sun but act like paints because they eventually start peeling off. This brings about wearing out, and reapplication should be done once signs of the fading start.