by silvi | 20:55

A Ceiling fan is one of the biggest reliefs in hot summer. It helps to cool the room by allowing proper air movements and also avoid high consumption of electricity keep a check on the bills. However, the benefits of ceiling fan can be enjoyed only is they have been installed properly, maintained well and works efficiently. Size, blades, angle and space between the blades are important factors that determine smooth functioning of the ceiling fans and proper air movement.

Here are the key highlights of a ceiling fan and points that one must consider before purchasing a ceiling fan.

Choosing the right type of Ceiling Fan

Installing a ceiling fan adds to the comfort in your room by cooling it and allowing apt air movement. There are different types of ceiling fans and choosing the right one to facilitate proper air flow is of high significance.

  • The size of the room must be considered before buying a ceiling fan. A ceiling fan circulates the air in a single room and an average size of 1200 mm is required for medium sized rooms for proper air flow.
  • Extra large rooms like attic should have multiple ceiling fans installed or a whole house fan which circulates the air throughout the house by pulling the heat and exhausting it out from the roof.
  • The difference in whole house and ceiling fans play a major role depending on the size of the rooms.

Often people are confused about selecting the right type of ceiling fan because of the varied aspects it has. You can visit http://atomberg.com/ to help you make that decision.

Type of Ceilings

There are different types of ceiling fans that are designed to fir the ceilings. The gap between the ceiling fan and ground should be at least 2-3 meters. There should be 24 inches space between the blades of the fan to allow proper movement of air.

If you have high ceilings, extended mounts must be used to higher efficiency and smooth functioning. The different types of ceiling fans that are considered according to preferences have been briefed below:

  1. Low Profile Ceiling Fan – This type of ceiling fans hugs the ceiling and is best suited for ceilings that are lesser than 8 feet tall.
  2. Energy Star – This type of ceiling fans are 20 – 50 % more efficient than the conventional ceiling fans and causes minimal environmental impact.
  3. Damp or Wet Ceiling Fans – These fans are best suited for humid locations or if you have a sunroom, patio or porch which has a wet atmosphere.

The Blades of the Ceiling Fans

The blades of the ceiling fans should be tilted at an angle of 12-15 degrees. This slight tilt is recommended to assist the movement of air. If the blades have a tilt more than this, it may decrease the efficiency of the motor and result in high consumption of electricity.

Bureau of Energy Efficiency

A start rating scheme has been launched for all ceiling fans by the BEE Ceiling fan in the year 2008. It has rated the fans with size 1200 mm and the rating is given on the basis of indicator known as service value. This service value is a ratio of the air delivery to power input.

Service value indicates efficiency of the fan and hence buyers can check the star rating prior purchase to note its efficiency. A 5 star rated fan have a potential of saving about 45 % of electricity.

These are some of the major points that must be considered while buying a ceiling fan. is important to maintain the ceiling fans to ensure its smooth functioning. Any noise or vibrations indicate poor efficiency and such fans should not be purchased.

 

 

  COMMENTS OFF