by silvi | 12:05

3 Ideas To Consider When Repairing Hose Reels If you want to keep garden hoses clean and neat, then making use of hose reel can be a big advantage. But because of some reasons, it gets damaged or punctured. You can either get a replacement of its essential parts or, do repairs at home, which can help in saving lots of money through the process. No matter what category of hose reel you have bought, there’s a chance that it’ll start to leak through its joining points or, it may be punctured. As a matter of fact, by following the tips listed below, doing repairs of the hose reel will be easier than you thought regardless if it is a hose reel cart, retractable hose reel or even the wall mounted units. Tip number 1. Check all connections – generally, hose reels have around 5 different connectors located on the leader hose, beginning of the faucet, garden hose, out tube and in tube. Say that your hose has a leak, then you have to try tightening every connection before opting out for an expensive replacement or repairs. There are instances that loose connector is only what causing the problem. As you’re repairing the connectors, you have to be certain to line up threads to avoid any damage to it.
Where To Start with Gardens and More
Tip number 2. Change defective O-rings – this is actually among the common repair steps required to be done in most reels. The reels at times got leak because the o-rings get cracked or dry after using for a long time. Fortunately, online stores and hardware shops have stock of such item which makes it hassle-free to buy replacement. Before you buy one on the other hand, you have to take a look at the website of the manufacturer or the guidebook in order to confirm which size of o-ring is recommended for that model you have at home.
The Essentials of Tips – Getting to Point A
Tip number 3. Take out the panel – once you turned off the water supply to your hose reel, detach the hose as well as the reel. Then after, you need to use a screwdriver to be able to take out 4 bolts which are located on the knob side of case and put them in a secure place. Once done, pull away the shield from case to be able to uncover the entire panel. These are just 3 simple tips that can help you perform a DIY repair on your hose reel. On the other hand, you should consider buying a new one in the event that the problem still exists after all the efforts you’ve put in it.

  COMMENTS OFF