by sandra | 03:02

6 Ways To Prevent Costly Heater Repair If you want to make sure that your heating system will be able to last for long and perform at optimal condition all the time, there are some ways that you need to take into consideration to make it happen including: Number 1. Make it a habit to check the furnace filter every month and change it if it is dirty. As you do this, it is going to help you save on utility bills and get better heating as well as air conditioning power at the same time. Number 2. If it seems that the heater comes on and off for short periods of time or odd times, simply adjust your HVAC unit in order to determine why it might be turning off and on quickly or erratically. Normally, it only needs minor adjustments to the thermostat and that’ll do the trick. In addition to that, you want to check the humidifier on the furnace if it has burnt out solenoid water valve or clogged or perhaps, a bad drum motor which makes it not to work.
The Best Advice About Experts I’ve Ever Written
Number 3. It is crucial as well to check the burner flame of your heating system. You should turn on the power switch and activate the burners by increasing the temperature of your furnace. Say that the flames have a blue color, then you’re doing fine but if it is yellow, then this can be a sign that the burners need to be clean.
A 10-Point Plan for Professionals (Without Being Overwhelmed)
Number 4. Make it a point that you remove the blower and give it a thorough cleaning by using a brush. Each and every blade needs to be cleaned carefully while ensuring that the counterweights are not disturbed. For the hot surface igniter, don’t dare to touch it. Instead, make use of a plastic straw and blow off the dirt that has accumulated in it. With this approach, you can prevent this fragile piece to be broken while helping you to avoid getting burnt at the same time. Number 5. Check for the bearing most especially if you have old system. To be sure that it is always in good condition, you might need to add several drops of machine oil at least once a year. Number 6. Say for example that your heating system works along with your AC unit, then it will be necessary for you to make adjustments. The dampers are oftentimes marked as to where the air is being directed. You can also adjust them in directing the warm air where you like it. Following these simple pointers can ensure that your heating system is in optimal condition.

  COMMENTS OFF